| BOOM ASSEMBLY & PARTS |
| PART # |
DESCRIPTION |
PRICE |
100-2077
100-2078
100-7000
100-7001
455-643
347-1
253-712
266-1263-01
73-53
214-209-01
214-208-01
252-80
453-282
253-713
266-939
266-930
266-1299
266-943
412-635
417-919
85-1982-01
181-8005-10
181-8003-10
181-8006-10
181-8007-10
|
Wind Boom Assembly, complete w/l00' cable, cups & vane
Wind Vector Assembly (Wind vane, cap, and pointer)
Wind Speed Assembly (housings w/internal components)
Wind Direction Assembly (housings w/internal components)
Bearing, ball (2 per shaft)
Cable, 8 conductor, 100 feet ($1.00 per foot for less than 100')
C Clip (holds beaings in place, 2 per shaft)
Disk, encoder
Grommet, rubber (goes on LED's & phototransistors)
Housing, Bottom (plastic housing only, no internal components)
Housing, Top (plastic housing only, no internal components)
Nut, Cap (holds wind cups on)
Shaft, encoder disc (stainless steel)
Washer, rubber (goes under wind cup cap nut)
Wind Cups
Wind Vane (aluminum rod w/plastic fin only, no cap or pointer)
Wind Vane Cap (aluminum, holds wind vane to shaft)
Wind Vane Pointer (stainless steel, goes on end of wind vane)
LED, infrared, TIL32
Phototransistor, infrared, TIL78
PCB, bare, wind sensor
PCB, Wind Cup Bottom (assembled, w/1 phototransistor)
PCB, Wind Cup Top (assembled, w/1 LED)
PCB, Wind Vane Bottom (assembled, w/4 phototransistors)
PCB, Wind Vane Top (assembled, w/4 LED's)
|
$425.00
$80.00
$127.00
$168.00
$13.50
$75.00
$0.50
$6.50
$0.25
$22.50
$30.00
$2.00
$17.00
$1.00
$12.50
$21.00
$28.00
$29.00
$4.50
$4.50
$8.50
$21.00
$21.00
$35.00
$35.00
|
| TEMPERATURE SENSORS |
| PART # |
DESCRIPTION |
PRICE |
100-1728
100-1727
|
Indoor temperature sensor, 10 ft cable
Outdoor temperature sensor, 70 ft cable
|
$45.00
$55.00
|
HUMIDITY SENSORS - Two types, Standard and Optional
| PLEASE NOTE: Humidity sensors are affected by the content of the air to which they are
exposed. Condensation can cause chemicals to be deposited on the element which will
degrade or destroy its ability to function. We do not guafantee the lifetime of these
sensors when used outdoors or in an indoor situation in which condensation can occur.
|
|
STANDARD HUMIDITY SENSOR (round, upright, white plastic sensor w/2 pins, screws)
|
Standard humidity sensors are used either indoors or outdoors, and are the original
Heath humidity sensor.
|
|
| PART # |
DESCRIPTION |
PRICE |
473-32
100-2080
100-2081
100-2082
|
Sensor, humidity (round, attached to PCB w/ screws)
PCB, humidity sensor (complete w/all components, no cable)
Sensor assembly, indoor (PCB, plastic case, 10 ft cable)
Sensor assembly, outdoor (PCB, plastic case, 90 ft cable)
|
$35.00
$60.00
$80.00
$110.00
|
OPTIONAL HUMIDITY SENSOR (square, flat, white sensor; 3 pins, corner of PCB is black)
|
| PART # |
DESCRIPTION |
PRICE |
473-51
100-2104
100-2105
|
Sensor, humidity (square, flat, bend over black corner of PCB)
PCB, humidity sensor (complete w/all components, no cable)
Sensor assembly, outdoor (PCB, plastic case, 90 ft cable)
|
$45.00
$80.00
$130.00
|
NOTES FOR OPTIONAL SENSORS:
a) Heath's replacement for the original sensor, uses different circuit & PCB.
b) Optional humidity sensors will work correctly only on the OUTDOOR terminals.
c) Sensing element is static sensitve, handle with caution.
d) Light sensitive. Must be mounted away from direct light or bright reflections.
e) Only works if EPROM #444-1010 is installed at location U418 on Main PCB.
|
| MISCELLANEOUS ITEMS |
| PART # |
DESCRIPTION |
PRICE |
412-670
421-33
|
Lamp, flourescent, #F8T5-CW
Fuse, 1/4 Amp, slow blow
|
$9.00
$3.00
|
|
